John Deere HH82 HH82 Heavy Harrow Tillage Tools
Features
Match acreage and power requirements with a variety of working widths
HH70 Five-Bar model
The Heavy Harrow is available in sizes ranging from 15.2 m to 25 m (50 ft to 82 ft). Power requirements range from 111.9 kW to 354.2 kW (150 hp to 475 hp).
Model |
Category |
Minimum engine power requirement |
15.2 m (50 ft), five bar |
4 |
111.9 kW (150 hp) |
15.2 m (50 ft), seven bar |
4 |
223.7 kW (300 hp) |
21.3 m (70 ft), five bar |
4 |
149.1 kW (200 hp) |
21.3 m (70 ft, seven bar |
5 |
298.3 kW (400 hp) |
25 m (82 ft), five bar |
4 |
223.7 kW (300 hp) |
25 m (82 ft), seven bar |
5 |
354.2 kW (475 hp) |
NOTE: Power requirement is dependent on field conditions and tine angle.
Easy adjustment and maintenance with Heavy Harrow tine configurations
HH70 Five-Bar model
The Heavy Harrow is available in either a five-row configuration with 66-cm x 1.6-cm (26-in. x 5/8-in.) tines or a seven-row configuration with 66-cm x 1.3-cm (26-in. x 1/2-in.) tines. Both configurations have tungsten carbide Endura-Tip tines.
- Easily replace tines by removing a few bolts and easily dropping out the tine bar.
- Tine adjustment is simple with either mechanical or hydraulic adjust options.
- The seven-row configuration offers approximately 68 percent more ground coverage in the field over the five-row configuration.
The Facebook link above is the "Official" Phillips Equipment Corporation Facebook page. We do not manage, endorse or claim responsibility for any material or information that may be posted on any other Facebook site claiming to represent us other than the one above.
