x
x
PEC store

10364 Wards Road
Rustburg, VA 24588
Monday - Friday 8:00 AM to 5:00 PM
Saturday March - Nov. 8:00 AM to 12:00 PM
Sunday Closed Call Us: (434) 821-2649 Get Directions
Phillips Equipment Corp, Virginia

John Deere 6068HFG85 6.8L Generator Drive Engine

John Deere Products / Engines and Drivetrain / Generator Drive Engines / 6068HFG85 6.8L Generator Drive Engine
Model Photo

 

Features

Jet fuel capable

  • The John Deere jet fuel capable engines run on military, arctic, and aviation fuel, including Jet A, Jet A-1, JP-5, and JP-8. If you need to switch back to diesel fuel, just fill up the tank and go.

4-valve cylinder head

  • Provides excellent airflow resulting in better transient response
  • Cross flow design

High pressure common rail fuel system

  • HPCR: Higher injection pressures, up to 1600 bar (23,000 PSI) variable injection pressure, variable timing control, multiple injections and controls the duration of injection

Cooled exhaust gas recirculation (EGR)

  • Cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx

Variable geometry turbocharger-VGT

  • Varies exhaust pressure based on load and speed to insure proper EGR flow, quicker transient response for exceptional block-loading, and best-in-class fuel economy

Air-to-air aftercooled

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs

Compact size

  • Horsepower/displacement ratio is best-in-class
  • Lower installed cost
  • Mounting points for Tier 3/Stage III A engine models same as Tier 2/Stage II engine models

John Deere electronic engine controls

  • Monitors critical engine functions providing warning and/or shutdown to prevent costly engine repairs; eliminates need for add-on governing components; all lowering total installed costs. Snapshot diagnostic data that can be retrieved using commonly available diagnostic service tools
  • New common wiring interface connector for vehicles or available OEM instrumentation packages; new solid conduit and "T" connectors to reduce wiring stress, greater durability and improved appearance
  • Factory installed engine mounted ECU or remote mounted ECU, wiring harness and associated components
  • Industry standard SAE J1939 interface which communicates with other vehicle systems, eliminating redundant sensors and reducing vehicle installed cost

Additional features

  • Self adjusting poly-vee fan drive
  • Either-side service
  • 500-hour oil change

Emissions Certifications

EPA Tier 3  

General engine data

Model 6068HFG85
Number of cylinders 6
Displacement-- L (cu in) 6.8 (415)
Bore and Stroke-- mm (in) 106 x 127 (4.17 x 5.00)
Compression Ratio 17.0:1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 1161 (45.7)
Width-- mm (in) 616 (24.3)
Height-- mm (in) 1128 (44.4)
Weight, dry - kg (lb) 678 (1495)

Performance data range

Hz (rpm) 60 ( 1800 )
Generator Efficiency % 88-92
Power Factor 0.8
Engine power - Prime kW 193-214
Engine power - Prime hp 259-287
Engine power - Standby kW 212-235
Engine power - Standby hp 284-315
Rated Fan Power - kW 6.5-14.1
Rated Fan Power - hp 8.7-18.9
Calculated generator set output - Prime kWe 164-184
Calculated generator set output - Prime kVA 181-230
Calculated generator set output - Standby kWe 194-214
Calculated generator set output - Standby kVA 226-254

CONNECT WITH US ON FACEBOOK facebook tmb

The Facebook link above is the "Official" Phillips Equipment Corporation Facebook page. We do not manage, endorse or claim responsibility for any material or information that may be posted on any other Facebook site claiming to represent us other than the one above.