x
x
PEC store

10364 Wards Road
Rustburg, VA 24588
Monday - Friday 8:00 AM to 5:00 PM
Saturday March - Nov. 8:00 AM to 12:00 PM
Sunday Closed Call Us: (434) 821-2649 Get Directions
Phillips Equipment Corp, Virginia

John Deere JD14X (6136CI440) Industrial Diesel Engine

John Deere Products / Engines and Drivetrain / Industrial Diesel Engines / Final Tier 4 (EPA Only) / JD14X (6136CI440) Industrial Diesel Engine
Model Photo

 

Features

Series turbocharger

  • Air is first drawn into the low-pressure turbocharger and compressed to a higher pressure. The compressed air is then drawn into the high-pressure turbocharger, where the air is further compressed. The high-pressure air is then routed through a charge air cooler and into the engine's intake manifold. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds — lowering stress on turbocharger components and improving reliability. Series turbocharging delivers more boost pressure than single turbocharger configurations, which results in higher power density, improved low-speed torque, and improved high altitude operation.

Cooled exhaust gas recirculation (EGR)

  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing Nox.

Selective catalytic reduction (SCR)

  • John Deere engines feature an SCR system that utilizes a urea-based additive, sometimes referred to as diesel exhaust fluid (DEF) to meet Stage IV emission standards. A chemical reaction in the SCR catalyst converts urea and NOx emissions into nitrogen and water vapor.

High-pressure common-rail (HPCR)

  • The HPCR fuel system provides variable common-rail pressure and high injection pressures. It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

Air-to-air aftercooled

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs.

4-valve cylinder head

  • The 4-valve cylinder head provides excellent airflow resulting in excellent low-speed torque and transient response.

Compact size

  • Lower installed cost
  • Engine mounting strategy consistent with previous engine models

John Deere electronic engine controls

  • Faster engine control unit (ECU) manages both the engine and the exhaust filter
  • Premium software integrates with equipment or vehicles to reduce engineering and installation costs

Emissions Certifications

EPA Final Tier 4  

General engine data

Model 6136CI440
Number of cylinders 6
Displacement-- L (cu in) 13.6 (827)
Bore and Stroke-- mm (in) 132 x 165 (5.2 x 6.5)
Compression Ratio 15.9:1
Engine Type In-line, 6-cycle
Aspiration Turbocharged
Length - mm (in) 1498 (58)*
Width-- mm (in) 890 (35)
Height-- mm (in) 1367 (54)
Weight, dry - kg (lb) 1521 (3353)

CONNECT WITH US ON FACEBOOK facebook tmb

The Facebook link above is the "Official" Phillips Equipment Corporation Facebook page. We do not manage, endorse or claim responsibility for any material or information that may be posted on any other Facebook site claiming to represent us other than the one above.